Well damn.. those bolts look real easy to do up as well..
EDIT- hang on, your photo shows the "speed bolts" as I call them which are awesome, but the image on the website shows the "wing nut and washer" style which is on my current pots.. think I might need to ring them to confirm exactly what they can send me..
£164 including VAT.. that is an absolute steal!! Im half tempted to get two and just flog my current pots on ebay..
I get very few/ no air bubbles at 45psi with vacuum pouring, so if I ran it at almost double that the bubbles would be none existent..
double the pressure equals one eighth of the volume.. bye bye bubbles!!
Definatly going to pick one of these up..
Then I just need to find a way to heat them a little.
My theory is that resin cures up really really fast at 30 degrees C, and quite slowly at 15 degress, with 20-25 being optimal.
To maximise my casting capacity with my existing equipment I need to get the trays in the pressure pot for as little time as possible, so when I get a workshop, Im going to rig up a system in which the pressure pots "sit" in a wooden box which is heated to 35 degrees C.
Pour the resin at room temp and then put them in the pressure pots for 10 minutes untill cured but still soft, take them out of the pressure pots and leaving on a tray in the "curing oven" for another 20 mins or so..
Oh the potential *cackles manically*
AH