Soldiering on!

As you can see, painting is progressing. I was having an issue with the chipping fluid but I sorted it out: the Mig Productions Absolute Chipping product required you to also use the fluid to chip the paint (rather than just warm water as is used with hairspray and other dedicated products). However after painting all of the rest of the parts in one big batch and then trying to chip them it still wasn’t working as it should. I believe where I went wrong this time was the use of a clear coat over the German Grey colour. The chipping fluid has relatively high surface tension and the gloss coat prevents it from giving an even coat over the top of the gloss. Apparently you shouldn’t need to use any kind of clear between your base colour and the chipping fluid, but I was really paranoid about removing paint back to the actual primer. Further research concluded that I should mix in some Tamiya X-21 Flat Base with the gloss to flatten it down a bit and allow the chipping fluid to cover evenly.

I won’t be using the Mig Productions product again though. I’ve purchased some AK-Interactive Worn Effects fluid and will try that next time. Having to use the chipping fluid for the removal too means you go through a lot of the Mig Productions stuff, so the AK-Interactive product should be more economical too.

Anyway, on to the pics. Nothing too exciting here: you can see the failed chipping on the leg. I’m just going to have to do the traditional “sponge and brush” chipping technique. I’ve given all parts except the torso their grey paint. Once that’s done I’ll do the chipping, hit it all with gloss clear and then pinwash all of the details. Then weathering (the exciting bit!).

I think these shots show just how naturally matte Tamiya paints are: they make the Vallejo paint (the dark grey parts) look super glossy!

Hopefully I’ll get another update done over the weekend

Leave a Reply

You must be logged in to post a comment.